High Quality Outdoor Wood Plastic Guardrail

1. Dimensional stability, longevity, natural feel
2. Stable over a wide temperature range, weather-resistant
3. High impact resistant
4. Environmentally friendly, recyclable
5. Board range of finishes and appearance
6. Easily produced and easily fabricated
7. Contains no toxic chemicals or preservatives
8. Resistance to rot and crack
9. Moisture resistant, low flame spread
10. Outstanding screw and nail retention

1. Preparation First, sufficient preparation work must be carried out, including the preparation of tools and the placement of WPC guardrails. The tools are mainly hammers, pliers, electric drills, etc., and the tools need to be of good quality and easy to operate. The WPC guardrail needs to be placed according to the position marked on the drawing, and drilled with an electric drill of moderate power to ensure that the holes are smooth and accurate.

2. Basic construction Basic construction refers to building the bracket on the ground first. The bracket should be stable and vertically placed, and the depth of the bracket should be at least about 40cm. The number of brackets should be determined according to the specific situation. After selecting the position of the bracket, dig corresponding holes around it, and the depth should be consistent with the bracket.

3. Install ground pillars After the brackets are installed, the ground pillars must be installed. First of all, the ground pillars should be wrapped with tape to prevent minor damage to the ground pillars caused by uneven soil filling, wind and sun exposure and other factors during installation. Then the ground pillar can be installed on top of the bracket.

4. Measure the center line In order to ensure the balance of the WPC guardrail during the entire installation process, it is necessary to measure the centerline after installing the ground pillars. Only after measuring the centerline can we ensure that the WPC guardrail will not tilt.

5. Install the top The top of the WPC guardrail is fixed by installing tenons. When installing, be careful not to have too many or too few tenons, otherwise it will affect the overall quality and stability of the WPC guardrail. The tenon should be placed in the center of the top of the ground column.

6. Install guardrails Installing the guardrail is an important step in the entire installation process. The guardrail needs to be placed in the corresponding position according to the specific situation. After the guardrail is placed, fixing accessories such as screws and joints should be installed as needed.

Hot Tags: high quality outdoor wood plastic guardrail, China high quality outdoor wood plastic guardrail manufacturers, suppliers, 3D Embossed WPC Composite Decking, Outdoor WPC Flooring, Prefab A Frame Kit Homes, White Louvered Pergola, Outdoor Privacy WPC Fence, Modern Art WPC Louver