Installation method of carbon crystal board
1. Quality control
First, when purchasing carbon crystal board, be sure to carefully check the packaging to ensure that the board is not damaged or deformed. Because once the carbon crystal board is deformed or damaged, it will affect the integrity of the board, thereby affecting the overall effect of the wall.
In addition, during the installation process, the quality of materials, such as carriers, glue, etc., must be strictly controlled, and the quality must be qualified according to the manufacturer's requirements.
2. Pre-treat the base wall
Before installing the carbon crystal board, the base wall needs to be pre-treated, such as cleaning, plastering, polishing, etc., to ensure that the base wall is flat and clean. If the wall is not flat enough, it needs to be leveled first. Only when the base wall is pre-treated can the carbon crystal board be firmly pasted.
3. Paste and assemble the carbon crystal board
When pasting the carbon crystal board, you need to use appropriate floor glue. For small-sized carbon crystal boards, you can use universal glue for the whole house. For larger-sized carbon crystal boards, you need to use special floor glue. Before pasting the carbon crystal board with glue, you can apply a layer of reinforced glue on the back of the carbon crystal board to increase adhesion. When pasting, you need to use a flat-headed shovel to roll up the carbon crystal board from bottom to top, then withdraw it from top to bottom, and evenly apply the glue on the back.
When installing the carbon crystal board, you need to use the gravity fixing method, that is, paste it from the bottom to the top, and then use a flat-headed shovel to compact the carbon crystal board. After the carbon crystal plate is fixed, you need to use a heading machine to head the plate and fix it to the wall. Leaving a gap between the two sides of the carbon crystal plate will facilitate the discharge of bubbles in the plate.
4. Handling interfaces
When pasting carbon crystal plates, if splicing occurs, you need to choose a suitable splicing method. Usually, we take the direct splicing method. When splicing the plates, make sure that the cuts are vertical and the seams are tight without glue leakage. Then apply pressure to ensure the flatness of the carbon crystal plate. If you use reinforced loose splicing, you cannot use any glue to paste it. It can only be fixed through the wall. The specifications of the reinforced special-shaped interface will be strictly followed for welding and splicing.
Through this article, I believe you have learned how to install carbon crystal panels. During the installation of carbon crystal panels, you need to pay attention to details to ensure the quality of construction. It is very important to have a reasonable plan and choose the right construction tools. If you encounter problems that you don't understand, you can always consult a home improvement designer or a professional installation engineer.
Hot Tags: green building materials carbon crystal board, China green building materials carbon crystal board manufacturers, suppliers, WPC Deck Flooring, WPC Wall Cladding Outdoor, Circular Pergola with Roof, Prefab Commercial Retail Buildings, White Louvered Pergola, WPC Louvers
