What are the installation methods of carbon crystal plates?
1. Preparation work
First, before installing the carbon crystal board, relevant preparation work needs to be done. Including cleaning the wall and the ground, checking and repairing the uneven surface, waterproofing the base material, etc.
2. Measurement and cutting of carbon crystal board
Before installing the carbon crystal board, the board needs to be measured and cut according to the measurement results. It should be noted that the cutting of the carbon crystal board must use special cutting tools and adopt the correct operation method to avoid the board from breaking.
3. Installation of carbon crystal board
After the carbon crystal board is cut, it is installed. First, apply the glue evenly on the wall and the ground, then place the carbon crystal board on the bonding surface in sequence, and flatten and squeeze it with special tools to ensure that the bonding between the board and the substrate is firm. When installing, it is necessary to pay attention to the matching of the interval and pattern to achieve the best decoration effect.
4. Finishing work of carbon crystal board
After the installation of the carbon crystal board is completed, finishing work is required. Including caulking, painting and other treatments to remove irregular parts to achieve a perfect and beautiful decorative effect.
Hot Tags: colorful carbon crystal decorative board, China colorful carbon crystal decorative board manufacturers, suppliers, Eco friendly Solid WPC Decking, WPC Panel for Ceiling, 3D WPC Decorative Wall Panels, WPC Floor Panel, WPC Wall Panel, WPC Bathroom Flooring
