How To Clean The Dust in The Gaps Of The Plastic Wood Floor?

The surface of wood plastic flooring is prone to wear and tear, and attention should be paid not to wear the surface when using it; Easy to be contaminated, be careful not to let the soil on the sole of the shoe get on the floor when using it; When using, attention should be paid not to let water droplets contaminate the floor to avoid corrosion, and attention should also be paid to avoiding direct sunlight to avoid shortening the service life of the floor. How to clean the gaps in general plastic wood flooring?
Vacuum cleaners can be used to clean plastic wood floors, and dust removal is very important. We will install new vacuum suction cups or gap vacuum suction cups on the vacuum cleaner, so that the gap dust can be cleaned as soon as possible.
After dust removal, use a rubber cotton mop to scrub. When mopping the floor, in order to clean the adverse effects as soon as possible, it is best to use technical floor cleaning solution and water for cleaning, instead of immediately rinsing with tap water.
If there were no vacuum cleaner, hair dryers would also be the culprit of crevice dust. Turn the hair dryer on to air conditioning, adjust it to the appropriate wind speed, and blow it towards the gaps in the Yunnan plastic wood floor. Dirt and dust can be blown out. Then, wipe and clean with a cloth.
After removing dust from the floor crevices, don't forget to apply floor wax. Before polishing and waxing, clean the floor with a dry cloth, mainly in the gaps, without leaving any cleaning solution. In addition, to prevent the floor from turning white, plastic wood flooring manufacturers suggest waiting for the floor to dry before starting polishing and waxing. Wooden plastic floor wax should be mixed evenly first, thoroughly soaked with a clean cloth, and waxed thinly and evenly on the floor. Actually, it's very simple and effective.