What Are The Precautions For The Construction Of Wooden Plastic Flooring

Plastic flooring is a new type of floor decoration material, mainly made from natural wood as the main raw material, while adding other materials. Compared to traditional wood flooring, wood plastic flooring has higher wear resistance, waterproofing, and good environmental friendliness, which can also be recycled. Wood plastic flooring construction is an important decoration work, and it is necessary to understand the precautions for wood plastic flooring construction to ensure the quality of flooring construction. Let the manufacturer introduce it to you below in order to make your construction smoother.
1. Before the construction of wooden plastic flooring, it is necessary to ensure the quality of the ground. Before the construction of wooden plastic flooring, the ground must be flat, seamless, and free from any stains, pits, dust, and other pollution on the surface. In addition, it is necessary to check the humidity of the ground to ensure that it is less than 4.5%, otherwise it will affect the construction quality of the floor. Plastic wood can be sawn, drilled, and other work using ordinary woodworking machinery.
2. Fix the wooden plastic keel on the floor with an expansion tube, with a spacing of 500-600 millimeters between the keels. Pay attention that the screw cap should not be higher than the surface of the wooden keel to maintain overall flatness. The installation of Yunnan wood plastic flooring is mainly at the corners, walls, window sills, and other positions. Attention should be paid to the edge sealing of the corners, and the joints of the edge sealing should be as flat as possible to avoid affecting the aesthetics of the floor.
3. During the construction process, attention should be paid to using self tapping screws for fastening between plastic and wood. Stainless steel self tapping screws are generally used outdoors, while self drilling self tapping screws are generally used between plastic and wood and steel plates.
4. Before tightening with self tapping screws, pre drilling is necessary. The normal pre drilled diameter is about 3/4 of the screw diameter.
5. Use one screw for each side of the plastic wood profile and keel. If the wooden plastic floor is deformed due to moisture, it not only affects the appearance, but also affects the service life of the floor. So, if deformation is found on the wooden plastic floor, it should be removed as soon as possible and a new wooden plastic floor should be installed.